What Are Articles of Association?

Articles of association form a document that specifies the regulations for a company’s operations and defines the company’s purpose. The document lays out how tasks are to be accomplished within the organization, including the process for appointing directors and the handling of financial records.

Understanding Articles of Association

Articles of association often identify the manner in which a company will issue shares, pay dividends, audit financial records, and provide voting rights. This set of rules can be considered a user’s manual for the company because it outlines the methodology for accomplishing the day-to-day tasks that must be completed.

While the content of the articles of association and the exact terms used vary from jurisdiction to jurisdiction, the document is quite similar throughout the world and generally contains provisions on the company name, the company’s purpose, the share capital, the company’s organization, and provisions regarding shareholder meetings.

In the the U.S. and Canada, articles of association are often referred to as “articles” for short.

Company Name

As a legal entity, the company must have a name that can be found in the articles of association. All jurisdictions will have rules concerning company names. Usually, a suffix such as “Inc.” or “Ltd.” must be used to show that the entity is a company. Also, some words that could confuse the public, such as “government” or “church,” cannot be used or must be used only for specific types of entities. Words that are offensive or heinous are also usually prohibited.

Purpose of the Company

The reason for the creation of the company must also be stated in the articles of association. Some jurisdictions accept very broad purposes—”management”—while others require greater detail—”the operation of a wholesale bakery,” for example.

Share Capital

The number and type of shares that comprise a company’s capital are listed in the articles of association. There will always be at least one form of common share that makes up a company’s capital. In addition, there may be several types of preferred shares. The company may or may not issue the shares, but if they are found in the articles of association, they can be issued if and when the need presents itself.

Organization of the Company

The legal organization of the company, including its address, the number of directors and officers, and the identity of the founders and original shareholders, are found in this section. Depending on the jurisdiction and type of business, the auditors and legal advisors of the company may also be in this section.

Shareholder Meetings

The provisions for the first general meeting of shareholders and the rules that will govern subsequent annual shareholder meetings—such as notices, resolutions, and votes—are laid out in detail in this section.

Small Business Example of Articles of Association

A person, or group of people, starting a business will typically refer to a lawyer, accountant, or both for advice when setting up a company.

The company will choose a name and define its purpose. The company is then registered at the state/province or federal level. Note that trademarking a name is a different process.

A company may issue shares to divide up the company if it wishes, but it doesn’t need to. The articles will lay out how this can be done. The lawyer or accountant will typically work with the directors of the company, asking them questions to help figure out how they wish to grow and how the company may end up being structured in the future.

Company directors are listed, along with their personal information. A business address is also provided.

Changes can be made to the articles of association with director(s) approval.

What Is Advanced Internal Rating-Based (AIRB)?

An advanced internal rating-based (AIRB) approach to credit risk measurement is a method that requests that all risk components be calculated internally within a financial institution. Advanced internal rating-based (AIRB) can help an institution reduce its capital requirements and credit risk.

In addition to the basic internal rating-based (IRB) approach estimations, the advanced approach assesses the risk of default using loss given default (LGD), exposure at default (EAD), and the probability of default (PD). These three elements help determine the risk-weighted asset (RWA) that is calculated on a percentage basis for the total required capital.”

Understanding Advanced Internal Rating-Based Systems

Implementing the AIRB approach is one step in the process of becoming a Basel II-compliant institution. However, an institution may implement the AIRB approach only if they comply with certain supervisory standards outlined in the Basel II accord.

Basel II is a set of international banking regulations, issued by the Basel Committee on Bank Supervision in July 2006, which expand upon those outlined in Basel I. These regulations provided uniform rules and guidelines to level the international banking field. Basel II expanded the rules for minimum capital requirements established under Basel I, provided a framework for regulatory review, and set disclosure requirements for assessment of capital adequacy. Basel II also incorporates credit risk of institutional assets.

Advanced Internal Rating-Based Systems and Empirical Models

The AIRB approach allows banks to estimate many internal risk components themselves. While the empirical models among institutions vary, one example is the Jarrow-Turnbull model. Originally developed and published by Robert A. Jarrow (Kamakura Corporation and Cornell University), along with Stuart Turnbull, (University of Houston), the Jarrow-Turnbull model is a “reduced-form” credit model. Reduced form credit models center on describing bankruptcy as a statistical process, in contrast with a microeconomic model of the firm’s capital structure. (The latter process forms the basis of common “structural credit models.”) The Jarrow–Turnbull model employs a random interest rates framework. Financial institutions often work with both structural credit models and Jarrow-Turnbull ones, when determining the risk of default.

Advanced Internal Rating-Based systems also help banks determine loss given default (LGD) and exposure at default (EAD). Loss given default is the amount of money to be lost in the event of a borrower default; while exposure at default (EAD) is the total value a bank is exposed to at the time of said default.

Advanced Internal Rating-Based Systems and Capital Requirements

Set by regulatory agencies, such as the Bank for International Settlements, the Federal Deposit Insurance Corporation, and the Federal Reserve Board, capital requirements set the amount of liquidity is needed to be held for a certain level of assets at many financial institutions. They also ensure that banks and depository institutions have enough capital to both sustain operating losses and honor withdrawals. AIRB can help financial institutions determine these levels.

What Is an Automated Teller Machine (ATM)?

An automated teller machine (ATM) is an electronic banking outlet that allows customers to complete basic transactions without the aid of a branch representative or teller. Anyone with a credit card or debit card can access cash at most ATMs, either in the USA or abroad.

ATMs are convenient, allowing consumers to perform quick self-service transactions such as deposits, cash withdrawals, bill payments, and transfers between accounts. Fees are commonly charged for cash withdrawals by the bank where the account is located, by the operator of the ATM, or by both. Some or all of these fees can be avoided by using an ATM operated directly by the bank that holds the account. Using an ATM abroad can cost more than using one in the USA.

ATMs are known in different parts of the world as automated bank machines (ABMs) or cash machines.

Understanding Automated Teller Machines (ATMs)

The first ATM appeared at a branch of Barclays Bank in London in 1967, though there are reports of a cash dispenser in use in Japan in the mid-1960s. The interbank communications networks that allowed a consumer to use one bank’s card at another bank’s ATM followed in the 1970s.

Within a few years, ATMs had spread around the globe, securing a presence in every major country. They now can be found even in tiny island nations such as Kiribati and the Federated States of Micronesia.

Types of ATMs

There are two primary types of ATMs. Basic units only allow customers to withdraw cash and receive updated account balances. The more complex machines accept deposits, facilitate line of credit payments and transfers, and access account information.

To access the advanced features of the complex units, a user often must be an account holder at the bank that operates the machine.

Analysts anticipate ATMs will become even more popular and forecast an increase in the number of ATM withdrawals. ATMs of the future are likely to be full-service terminals instead of or in addition to traditional bank tellers.

ATM Design Elements

Although the design of each ATM is different, they all contain the same basic parts:

• Card reader: This part reads the chip on the front of the card or the magnetic stripe on the back of the card.
• Keypad: The keypad is used by the customer to input information, including personal identification number (PIN), the type of transaction required, and the amount of the transaction.
• Cash dispenser: Bills are dispensed through a slot in the machine, which is connected to a safe at the bottom of the machine.
• Printer: If required, consumers can request receipts that are printed out of the ATM. The receipt records the type of transaction, the amount, and the account balance.
• Screen: The ATM issues prompts that guide the consumer through the process of executing the transaction. Information is also transmitted on the screen, such as account information and balances.

Full-service machines now often have slots for depositing paper checks or cash.

How to Use an ATM

Banks place ATMs inside and outside of their branches. Other ATMs are located in high-traffic areas such as shopping centers, grocery stores, convenience stores, airports, bus and railway stations, gas stations, casinos, restaurants, and other locations. Most ATMs that are found in banks are multifunctional, while others that are off-site tend to be primarily or entirely designed for cash withdrawals.

ATMs require consumers to use a plastic card—either a bank debit card or a credit card—to complete a transaction. Consumers are authenticated by a PIN before any transaction can be made.

Many cards come with a chip, which transmits data from the card to the machine. These work in the same fashion as a bar code that is scanned by a code reader.

ATM Fees

Account holders can use their bank’s ATMs at no charge, but accessing funds through a unit owned by a competing bank usually incurs a fee. According to MoneyRates.com, the average total fees to withdraw cash from an out-of-network ATM was $4.55 as of 2022.

Some banks will reimburse their customers for the fee, especially if there is no corresponding ATM available in the area.

So, if you’re one of those people who draws weekly spending money from an ATM, using the wrong machine could cost you nearly $240 a year.

ATM Ownership

In many cases, banks and credit unions own ATMs. However, individuals and businesses may also buy or lease ATMs on their own or through an ATM franchise. When individuals or small businesses such as restaurants or gas stations own ATMs, the profit model is based on charging fees to the machine’s users.

Banks also own ATMs with this intent. They use the convenience of an ATM to attract clients. ATMs also take some of the customer service burdens from bank tellers, saving banks money in payroll costs.

Using ATMs Abroad

ATMs make it simple for travelers to access their checking or savings accounts from almost anywhere in the world.

Travel experts advise consumers to use foreign ATMs as a source of cash abroad, as they generally receive a more favorable exchange rate than they would at most currency exchange offices.

However, the account holder’s bank may charge a transaction fee or a percentage of the amount exchanged. Most ATMs do not list the exchange rate on the receipt, making it difficult to track spending.

The Bottom Line

ATM stands for automated teller machine. These are electronic banking outlets that allow people to complete transactions without going into a branch of their bank. Some ATMs are simple cash dispensers, while others allow a variety of transactions such as check deposits, balance transfers, and bill payments. The first ATMs appeared in the mid- to late 1960s and have grown in number to more than 2 million worldwide.