What Is an Air Waybill (AWB)?

An air waybill (AWB) is a document that accompanies goods shipped by an international air courier to provide detailed information about the shipment and allow it to be tracked. The bill has multiple copies so that each party involved in the shipment can document it. An air waybill (AWB), also known as an air consignment note, is a type of bill of lading. However, an AWB serves a similar function to ocean bills of lading, but an AWB is issued in non-negotiable form, meaning there’s less protection with an AWB versus bills of lading.

Understanding an Air Waybill (AWB)

An air waybill (AWB) serves as a receipt of goods by an airline (the carrier), as well as a contract of carriage between the shipper and the carrier. It’s a legal agreement that’s enforceable by law. The AWB becomes an enforceable contract when the shipper (or shipper’s agent) and carrier (or carrier’s agent) both sign the document. 

The airway bill will also contain the shipper’s name and address, consignee’s name and address, three-letter origin airport code, three letter destination airport code, declared shipment value for customs, number of pieces, gross weight, a description of the goods, and any special instructions (e.g., “perishable”).

An AWB also contains the conditions of the contract that describe the carrier’s terms and conditions, such as its liability limits and claims procedures, a description of the goods, and applicable charges.

Air Waybill (AWB) vs. Bill of Landing

AWBs are unlike other bills of lading, in that they are non-negotiable instruments, meaning that it does not specify on which flight the shipment will be sent, or when it will reach its destination. Bills of lading are legal documents between the shipper of goods and the carrier, detailing the type, quantity, and destination of the goods being carried.

Bills of lading also act as a receipt of shipment when the goods are delivered at a predetermined destination. This document accompanies the goods and is signed by authorized representatives of the shipper, the carrier, and the recipient. However, unlike a bill of landing, an air waybill (AWB) is non-negotiable. Being non-negotiable, the AWB is a contract just for transportation and does not cover the merchandise value.

Requirements for an Air Waybill

The International Air Transport Association (IATA) designs and distributes air waybills. There are two types of AWBs—an airline-specific one and a neutral one. Each airline AWB must include the carrier’s name, head office address, logo, and air waybill number. Neutral air waybills have the same layout and format as airline AWBs; they just aren’t prepopulated.

An air waybill has 11 numbers and came with eight copies of varying colors. With the Multilateral Electronic Air Waybill Resolution 672, paper air waybills are no longer required. Dubbed the e-AWB, it’s been in use since 2010 and became the default contract for all air cargo shipments on enabled trade lines as of 2019.

What Is an Automated Teller Machine (ATM)?

An automated teller machine (ATM) is an electronic banking outlet that allows customers to complete basic transactions without the aid of a branch representative or teller. Anyone with a credit card or debit card can access cash at most ATMs, either in the USA or abroad.

ATMs are convenient, allowing consumers to perform quick self-service transactions such as deposits, cash withdrawals, bill payments, and transfers between accounts. Fees are commonly charged for cash withdrawals by the bank where the account is located, by the operator of the ATM, or by both. Some or all of these fees can be avoided by using an ATM operated directly by the bank that holds the account. Using an ATM abroad can cost more than using one in the USA.

ATMs are known in different parts of the world as automated bank machines (ABMs) or cash machines.

Understanding Automated Teller Machines (ATMs)

The first ATM appeared at a branch of Barclays Bank in London in 1967, though there are reports of a cash dispenser in use in Japan in the mid-1960s. The interbank communications networks that allowed a consumer to use one bank’s card at another bank’s ATM followed in the 1970s.

Within a few years, ATMs had spread around the globe, securing a presence in every major country. They now can be found even in tiny island nations such as Kiribati and the Federated States of Micronesia.

Types of ATMs

There are two primary types of ATMs. Basic units only allow customers to withdraw cash and receive updated account balances. The more complex machines accept deposits, facilitate line of credit payments and transfers, and access account information.

To access the advanced features of the complex units, a user often must be an account holder at the bank that operates the machine.

Analysts anticipate ATMs will become even more popular and forecast an increase in the number of ATM withdrawals. ATMs of the future are likely to be full-service terminals instead of or in addition to traditional bank tellers.

ATM Design Elements

Although the design of each ATM is different, they all contain the same basic parts:

• Card reader: This part reads the chip on the front of the card or the magnetic stripe on the back of the card.
• Keypad: The keypad is used by the customer to input information, including personal identification number (PIN), the type of transaction required, and the amount of the transaction.
• Cash dispenser: Bills are dispensed through a slot in the machine, which is connected to a safe at the bottom of the machine.
• Printer: If required, consumers can request receipts that are printed out of the ATM. The receipt records the type of transaction, the amount, and the account balance.
• Screen: The ATM issues prompts that guide the consumer through the process of executing the transaction. Information is also transmitted on the screen, such as account information and balances.

Full-service machines now often have slots for depositing paper checks or cash.

How to Use an ATM

Banks place ATMs inside and outside of their branches. Other ATMs are located in high-traffic areas such as shopping centers, grocery stores, convenience stores, airports, bus and railway stations, gas stations, casinos, restaurants, and other locations. Most ATMs that are found in banks are multifunctional, while others that are off-site tend to be primarily or entirely designed for cash withdrawals.

ATMs require consumers to use a plastic card—either a bank debit card or a credit card—to complete a transaction. Consumers are authenticated by a PIN before any transaction can be made.

Many cards come with a chip, which transmits data from the card to the machine. These work in the same fashion as a bar code that is scanned by a code reader.

ATM Fees

Account holders can use their bank’s ATMs at no charge, but accessing funds through a unit owned by a competing bank usually incurs a fee. According to MoneyRates.com, the average total fees to withdraw cash from an out-of-network ATM was $4.55 as of 2022.

Some banks will reimburse their customers for the fee, especially if there is no corresponding ATM available in the area.

So, if you’re one of those people who draws weekly spending money from an ATM, using the wrong machine could cost you nearly $240 a year.

ATM Ownership

In many cases, banks and credit unions own ATMs. However, individuals and businesses may also buy or lease ATMs on their own or through an ATM franchise. When individuals or small businesses such as restaurants or gas stations own ATMs, the profit model is based on charging fees to the machine’s users.

Banks also own ATMs with this intent. They use the convenience of an ATM to attract clients. ATMs also take some of the customer service burdens from bank tellers, saving banks money in payroll costs.

Using ATMs Abroad

ATMs make it simple for travelers to access their checking or savings accounts from almost anywhere in the world.

Travel experts advise consumers to use foreign ATMs as a source of cash abroad, as they generally receive a more favorable exchange rate than they would at most currency exchange offices.

However, the account holder’s bank may charge a transaction fee or a percentage of the amount exchanged. Most ATMs do not list the exchange rate on the receipt, making it difficult to track spending.

The Bottom Line

ATM stands for automated teller machine. These are electronic banking outlets that allow people to complete transactions without going into a branch of their bank. Some ATMs are simple cash dispensers, while others allow a variety of transactions such as check deposits, balance transfers, and bill payments. The first ATMs appeared in the mid- to late 1960s and have grown in number to more than 2 million worldwide.

What Is 1%/10 Net 30?

The 1%/10 net 30 calculation is a way of providing cash discounts on purchases. It means that if the bill is paid within 10 days, there is a 1% discount. Otherwise, the total amount is due within 30 days.

Understanding 1%/10 Net 30

The 1%/10 net 30 calculation represents the credit terms and payment requirements outlined by a seller. The vendor may offer incentives to pay early to accelerate the inflow of cash. This is particularly important for cash-strapped businesses or companies with no revolving lines of credit. Companies with higher profit margins are more likely to offer cash discounts.

Although the numbers are always interchangeable across vendors, the standard structure for offering a payment discount is the same. The first number will always be the percentage discount. This figure will indicate the total percentage discount on the invoice prior to shipping or taxes that may be discounted upon early payment.

Special Considerations

Discount terms like 1%/10 net 30 are virtual short-term loans. This is because if the discount is not taken, the buyer must pay the higher price as opposed to paying a reduced cost. In effect, the difference between these two prices reflects the discount lost, which can be reported as a percentage. This percentage is called the cost of credit.

When the credit terms are 1%/10 net 30, the net result becomes, in essence, an interest charge of 18.2% upon the failure to take the discount.

The accounting entry for a cash discount taken may be performed in two ways. The gross method of purchase discounts assumes the discount will not be taken and will only input the discount upon actual receipt of payment within the discount period.

Therefore, the entire amount of receivable will be debited. When payment is received, the receivable will be credited in the amount of the payment and the difference will be a credit to discounts taken. The alternative method is called the net method. For a discount of 1%/10 net 30, it is assumed the 1% discount will be taken. This results in a receivable being debited for 99% of the total cost.

Example of 1%/10 Net 30

For example, if “$1000 – 1%/10 net 30” is written on a bill, the buyer can take a 1% discount ($1000 x 0.01 = $10) and make a payment of $990 within 10 days, or pay the entire $1000 within 30 days.

The second number is always the number of days of the discount period. In the example above, the discount period is 10 days. Finally, the third number always reflects the invoice due date.