What Are Accounts Payable (AP)?

Accounts payable (AP), or “payables,” refer to a company’s short-term obligations owed to its creditors or suppliers, which have not yet been paid. Payables appear on a company’s balance sheet as a current liability.

Another, less common usage of “AP,” refers to the business department or division that is responsible for making payments owed by the company to suppliers and other creditors.

Accounts payable can be compared with accounts receivable.

Understanding Accounts Payable (AP)

A company’s total accounts payable balance at a specific point in time will appear on its balance sheet under the current liabilities section. Accounts payable are obligations that must be paid off within a given period to avoid default. At the corporate level, AP refers to short-term payments due to suppliers. The payable is essentially a short-term IOU from one business to another business or entity. The other party would record the transaction as an increase to its accounts receivable in the same amount.

AP is an important figure in a company’s balance sheet. If AP increases over a prior period, that means the company is buying more goods or services on credit, rather than paying cash. If a company’s AP decreases, it means the company is paying on its prior period obligations at a faster rate than it is purchasing new items on credit. Accounts payable management is critical in managing a business’s cash flow.

When using the indirect method to prepare the cash flow statement, the net increase or decrease in AP from the prior period appears in the top section, the cash flow from operating activities. Management can use AP to manipulate the company’s cash flow to a certain extent. For example, if management wants to increase cash reserves for a certain period, they can extend the time the business takes to pay all outstanding accounts in AP.

However, this flexibility to pay later must be weighed against the ongoing relationships the company has with its vendors. It’s always good business practice to pay bills by their due dates.

Recording Accounts Payable

Proper double-entry bookkeeping requires that there must always be an offsetting debit and credit for all entries made into the general ledger. To record accounts payable, the accountant credits accounts payable when the bill or invoice is received. The debit offset for this entry generally goes to an expense account for the good or service that was purchased on credit. The debit could also be to an asset account if the item purchased was a capitalizable asset. When the bill is paid, the accountant debits accounts payable to decrease the liability balance. The offsetting credit is made to the cash account, which also decreases the cash balance.

For example, imagine a business gets a $500 invoice for office supplies. When the AP department receives the invoice, it records a $500 credit in accounts payable and a $500 debit to office supply expense. The $500 debit to office supply expense flows through to the income statement at this point, so the company has recorded the purchase transaction even though cash has not been paid out. This is in line with accrual accounting, where expenses are recognized when incurred rather than when cash changes hands. The company then pays the bill, and the accountant enters a $500 credit to the cash account and a debit for $500 to accounts payable.

A company may have many open payments due to vendors at any one time. All outstanding payments due to vendors are recorded in accounts payable. As a result, if anyone looks at the balance in accounts payable, they will see the total amount the business owes all of its vendors and short-term lenders. This total amount appears on the balance sheet. For example, if the business above also received an invoice for lawn care services in the amount of $50, the total of both entries in accounts payable would equal $550 prior to the company paying off those obligations.

Accounts Payable vs. Trade Payables

Although some people use the phrases “accounts payable” and “trade payables” interchangeably, the phrases refer to similar but slightly different situations. Trade payables constitute the money a company owes its vendors for inventory-related goods, such as business supplies or materials that are part of the inventory. Accounts payable include all of the company’s short-term obligations.

For example, if a restaurant owes money to a food or beverage company, those items are part of the inventory, and thus part of its trade payables. Meanwhile, obligations to other companies, such as the company that cleans the restaurant’s staff uniforms, fall into the accounts payable category. Both of these categories fall under the broader accounts payable category, and many companies combine both under the term accounts payable.

Accounts Payable vs. Accounts Receivable

Accounts receivable (AR) and accounts payable are essentially opposites. Accounts payable is the money a company owes its vendors, while accounts receivable is the money that is owed to the company, typically by customers. When one company transacts with another on credit, one will record an entry to accounts payable on their books while the other records an entry to accounts receivable.

The Bottom Line

Accounts payable (AP) refer to the obligations incurred by a company during its operations that remain due and must be paid in the short term. As such, AP is listed on the balance sheet as a current liability. Typical payables items include supplier invoices, legal fees, contractor payments, and so on.

What Are Accounts Receivable (AR)?

Accounts receivable (AR) are the balance of money due to a firm for goods or services delivered or used but not yet paid for by customers. Accounts receivable are listed on the balance sheet as a current asset. Any amount of money owed by customers for purchases made on credit is AR.

Understanding Accounts Receivable

Accounts receivable refer to the outstanding invoices that a company has or the money that clients owe the company. The phrase refers to accounts that a business has the right to receive because it has delivered a product or service. Accounts receivable, or receivables, represent a line of credit extended by a company and normally have terms that require payments due within a relatively short period. It typically ranges from a few days to a fiscal or calendar year.

Companies record accounts receivable as assets on their balance sheets because there is a legal obligation for the customer to pay the debt. They are considered a liquid asset, because they can be used as collateral to secure a loan to help meet short-term obligations. Receivables are part of a company’s working capital.

Furthermore, accounts receivable are current assets, meaning that the account balance is due from the debtor in one year or less. If a company has receivables, this means that it has made a sale on credit but has yet to collect the money from the purchaser. Essentially, the company has accepted a short-term IOU from its client.

Accounts Receivable vs. Accounts Payable

When a company owes debts to its suppliers or other parties, these are accounts payable. Accounts payable are the opposite of accounts receivable. To illustrate, imagine Company A cleans Company B’s carpets and sends a bill for the services. Company B owes them money, so it records the invoice in its accounts payable column. Company A is waiting to receive the money, so it records the bill in its accounts receivable column.

Benefits of Accounts Receivable

Accounts receivable are an important aspect of a business’s fundamental analysis. Accounts receivable are a current asset, so it measures a company’s liquidity or ability to cover short-term obligations without additional cash flows. 

Fundamental analysts often evaluate accounts receivable in the context of turnover, also known as accounts receivable turnover ratio, which measures the number of times a company has collected on its accounts receivable balance during an accounting period. Further analysis would include assessing days sales outstanding (DSO), the average number of days that it takes to collect payment after a sale has been made.

Example of Accounts Receivable

An example of accounts receivable includes an electric company that bills its clients after the clients received the electricity. The electric company records an account receivable for unpaid invoices as it waits for its customers to pay their bills. 

Most companies operate by allowing a portion of their sales to be on credit. Sometimes, businesses offer this credit to frequent or special customers that receive periodic invoices. The practice allows customers to avoid the hassle of physically making payments as each transaction occurs. In other cases, businesses routinely offer all of their clients the ability to pay after receiving the service.

What Is an Accrued Expense?

An accrued expense, also known as accrued liabilities, is an accounting term that refers to an expense that is recognized on the books before it has been paid. The expense is recorded in the accounting period in which it is incurred.

Understanding Accrued Expenses

Since accrued expenses represent a company’s obligation to make future cash payments, they are shown on a company’s balance sheet as current liabilities. An accrued expense can be an estimate and differ from the supplier’s invoice that will arrive at a later date. Following the accrual method of accounting, expenses are recognized when they are incurred, not necessarily when they are paid.

An example of an accrued expense is when a company purchases supplies from a vendor but has not yet received an invoice for the purchase. Other forms of accrued expenses include interest payments on loans, warranties on products or services received, and taxes—all of which have been incurred or obtained, but for which no invoices have been received nor payments made. Employee commissions, wages, and bonuses are accrued in the period they occur although the actual payment is made in the following period.

Accrual vs. Cash Basis Accounting

Accrual accounting differs from cash basis accounting, which records financial events and transactions only when cash is exchanged—often resulting in the overstatement and understatement of income and account balances.

Although the accrual method of accounting is labor-intensive because it requires extensive journaling, it is a more accurate measure of a company’s transactions and events for each period. This more complete picture helps users of financial statements to better understand a company’s present financial health and predict its future financial position.

Accrued Expenses vs. Prepaid Expenses

Accrued expenses are the opposite of prepaid expenses. Prepaid expenses are payments made in advance for goods and services that are expected to be provided or used in the future. While accrued expenses represent liabilities, prepaid expenses are recognized as assets on the balance sheet. This is because the company is expected to receive future economic benefit from the prepayment.

On the other hand, an accrued expense is an event that has already occurred in which cash has not been a factor. Not only has the company already received the benefit, it still needs to remit payment. Therefore, it is literally the opposite of a prepayment; an accrual is the recognition of something that has already happened in which cash is yet to be settled.

Advantages and Disadvantages of Accrued Expenses

Advantages

Accrued expenses theoretically make a company’s financial statements more accurate. While the cash method is more simple, accrued expenses strive to include activity that may not have fully been incurred but will still happen. Consider an example where a company enters into a contract to incur consulting services. If the company receives an invoice for $5,000, accounting theory states the company should technically recognize this transaction because it is contractually obligated to pay for the service.

Accrued expenses also may make it easier for companies to plan and strategize. Accrued expenses often yield more consistent financial results as companies can include recurring transactions in their financial reports that may not yet have been paid. In addition, accrued expenses may be a financial reporting requirement depending on the company and their Securities and Exchange Commission filing requirements.

Disadvantages

Because of additional work of accruing expenses, this method of accounting is more time-consuming and demanding for staff to prepare. There is a greater chance of misstatements, especially is auto-reversing journal entries are not used. In addition, a company runs of the risk of accidently accruing an expense that they may have already paid.

Last, the accrual method of accounting blurs cash flow and cash usage as it includes non-cash transactions that have not yet impacted bank accounts. For a large company, the general ledger will be flooded with transactions that report items that have had no bearing on the company’s bank statement nor impact to the current amount of cash on hand.

Special Considerations

Reversing Entries

A critical component to accrued expenses is reversing entries, journal entries that back out a transaction in a subsequent period.

Accrued expenses are not meant to be permanent; they are meant to be temporary records that take the place of a true transaction in the short-term. Every accrued expense must have a reversing entry; without the reversing entry, a company risks duplicating transactions by recording both the actual invoice when it gets paid as well as the accrued expense.

Month-End/Year-End

Accrued expenses are prevalent during the end of an accounting period. A company often attempts to book as many actual invoices it can during an accounting period before closing its accounts payable ledger. Then, supporting accounting staff analyze what transactions/invoices might not have been recorded by the AP team and book accrued expenses.

For companies that are responsible for external reporting, accrued expenses play a big part in wrapping up month-end, quarter-end, or fiscal year-end processes. A company usually does not book accrued expenses during the month; instead, accrued expenses are booked during the close period.

Example of Accrued Expense

A company pays its employees’ salaries on the first day of the following month for services received in the prior month. So, employees that worked all of November will be paid in December. If on Dec. 31, the company’s income statement recognizes only the salary payments that have been made, the accrued expenses from the employees’ services for December will be omitted.

Because the company actually incurred 12 months’ worth of salary expenses, an adjusting journal entry is recorded at the end of the accounting period for the last month’s expense. The adjusting entry will be dated Dec. 31 and will have a debit to the salary expenses account on the income statement and a credit to the salaries payable account on the balance sheet.

When the company’s accounting department receives the bill for the total amount of salaries due, the accounts payable account is credited. Accounts payable is found in the current liabilities section of the balance sheet and represents the short-term liabilities of a company. After the debt has been paid off, the accounts payable account is debited and the cash account is credited.

The Bottom Line

Companies using the accrual method of accounting recognize accrued expenses, costs that have not yet been paid for but have already been incurred. Accrued expenses make a set of financial statements more consistent by recording charges in specific periods, though it takes more resources to perform this type of accounting. While the cash method of accounting recognizes items when they are paid, the accrual method recognizes accrued expenses based on when service is performed or received. 

What Is the Acid-Test Ratio?

The acid-test ratio, commonly known as the quick ratio, uses a firm’s balance sheet data as an indicator of whether it has sufficient short-term assets to cover its short-term liabilities.

Understanding the Acid-Test Ratio

In certain situations, analysts prefer to use the acid-test ratio rather than the current ratio (also known as the working capital ratio) because the acid-test method ignores assets such as inventory, which may be difficult to quickly liquidate. The acid test ratio is thus a more conservative metric.

Companies with an acid-test ratio of less than 1 do not have enough liquid assets to pay their current liabilities and should be treated with caution. If the acid-test ratio is much lower than the current ratio, it means that a company’s current assets are highly dependent on inventory.

This is not a bad sign in all cases, however, as some business models are inherently dependent on inventory. Retail stores, for example, may have very low acid-test ratios without necessarily being in danger. The acceptable range for an acid-test ratio will vary among different industries, and you’ll find that comparisons are most meaningful when analyzing peer companies in the same industry as each other.

For most industries, the acid-test ratio should exceed 1. On the other hand, a very high ratio is not always good. It could indicate that cash has accumulated and is idle, rather than being reinvested, returned to shareholders, or otherwise put to productive use.

Some tech companies generate massive cash flows and accordingly have acid-test ratios as high as 7 or 8. While this is certainly better than the alternative, these companies have drawn criticism from activist investors who would prefer that shareholders receive a portion of the profits.

Calculating the Acid-Test Ratio

The numerator of the acid-test ratio can be defined in various ways, but the main consideration should be gaining a realistic view of the company’s liquid assets. Cash and cash equivalents should definitely be included, as should short-term investments, such as marketable securities.

Accounts receivable are generally included, but this is not appropriate for every industry. In the construction industry, for example, accounts receivable may take much more time to recover than is standard practice in other industries, so including it could make a firm’s financial position seem much more secure than it is in reality.

The formula is:

$\begin{aligned} &\text{Acid Test} = \frac{ \text{Cash} + \text{Marketable Securities} + \text{A/R} }{ \text{Current Liabilities} } \\ &\textbf{where:} \\ &\text{A/R} = \text{Accounts receivable} \\ \end{aligned}$​Acid Test=Current LiabilitiesCash+Marketable Securities+A/R​where:A/R=Accounts receivable​

Another way to calculate the numerator is to take all current assets and subtract illiquid assets. Most importantly, inventory should be subtracted, keeping in mind that this will negatively skew the picture for retail businesses because of the amount of inventory they carry. Other elements that appear as assets on a balance sheet should be subtracted if they cannot be used to cover liabilities in the short term, such as advances to suppliers, prepayments, and deferred tax assets.

The ratio’s denominator should include all current liabilities, which are debts and obligations that are due within one year. It is important to note that time is not factored into the acid-test ratio. If a company’s accounts payable are nearly due but its receivables won’t come in for months, that company could be on much shakier ground than its ratio would indicate. The opposite can also be true.

Acid-Test Ratio Example

A company’s acid-test ratio can be calculated using its balance sheet. Below is an abbreviated version of Apple Inc.’s (AAPL) balance sheet as of Jan. 27, 2022, showing the components of the company’s current assets and current liabilities (all figures in millions of dollars):